![]() ![]() ![]() I rebooted the PC a few times to make sure that the drivers installed properly and no issues were prevalent. After installing all the hardware components, powering on successfully, booting from Windows 10 after installation, installing chipset and other drivers for this motherboard, everything was working perfectly fine. I assembled a new PC using this MSI B350 gaming pro motherboard with an AMD A8-8000's series APU for socket AM4. I have the exact same issue however even after trying multiple troubleshooting steps from this forum, online, and even via MSI's phone technical support, nothing has solved my issue. The power supply isn't compatible with the motherboard? ( although It was used on an Asus motherboard before and worked fine) The debug led for CPU remains lit, I got no video and I can't use the power or reset button. I got the same issue as before I updated the BIOS. Yesterday I got it back and assembled the computer again, and I got to square one. They updated the latest version from the MSI, the 7A39v2C version. I sent it to a local PC store for an BIOS update. I took it apart, I tried to assemble the cpu again, same result. Also I couldn't turn it off by pressing the power button, so i had to switch off the power supply. When I first time assembled it I got no post and the debug led for CPU was lit. RAM : Corsair Vengeance LPX Red 8GB DDR4 2400MHz CL14 (one stick only, because I am planning to upgrade later to 16 GB) Right now I can't even get the BIOS to appear on screen, i've used both the HDMI ports on the graphics card and motherboard, and the VGA port on the motherboard too, nothing appears on screen.I decided I want to upgrade my system and bought a msi motherboard and the latest APU from AMD. I have a USB drive with a Windows 10 Boot on it, but it doesn't seem to recognize this, and the 2 drives in there (A SSD and HDD) are blank. At this point the GPU LED (not the one in the EZ DEBUG row, but the one next to the CPU) is also lit (due to a typo in the manual that comes with the board, i have no idea if this is supposed to be lit or not). Finally the Boot LED lights up and stays lit. Next the VGA debug LED lights up and turns off. When I turn it on the CPU debug LED lights up for a bit, then turns off. ![]() Finally got the PSU and hooked things up. Rywith an evga 1080 ti on a MSI B350 Tomahawk Board. Right now I can't even get the BIOS to appear on screen, i've used both the HDMI ports on the graphics card and motherboard, and the VGA port on the motherboard too, nothing appears on screen. ![]() GeIL DDR2400 ram 2x 4gb (in slots 2 and 4) I’m having the exact same issue and did the exact same things. ![]()
0 Comments
Leave a Reply. |